China Custom Spline Gear 15t 125X51X45X60 Coupling Gear Flexible Coupling for Excavator

Product Description

Spline gear 15T 125X51X45X60 Coupling gear Flexible Coupling for Excavator

Our main products:
steel cover lock, filter, oil grid, pump, cylinder head, crankshaft, camshaft, connecting rod, connecting rod bearing, valve, plunger, nozzle, exhaust valve, engine assembly, intake pump , fan blade, engine preheater, radiator, intake valve, main bearing, crankshaft bearing, nozzle, nozzle pipe, oil pump, piston, piston pin, piston ring, plunger, valve seat, thrust bearing, valve guide, valve Seats, valve seals, gasket sets, water pumps, turbochargers, generators, starters, sensors…

COUPLING/COUPLING ASSY
NO. LB NO. Model OEM NO. Name NO. LB NO. Model OEM NO. Name NO. LB NO. Model OEM NO. Name
1 KLB-Q2001   25H  162*92 COUPLING 22 KLB-Q2571 16A 155*76 COUPLING 43 KLB-Q2043 S32S 235*97 COUPLING
2 KLB-Q2002 MS110 DH55 30H 195*105 COUPLING 23 KLB-Q2571 16AS 155*76 COUPLING 44 KLB-Q2044 S25S 163*58 COUPLING
3 KLB-Q2003 30H 195*105 COUPLING ASSY 24 KLB-Q2571 22A 153*76 COUPLING 45 KLB-Q2045 E200B 14T COUPLING
4 KLB-Q2004 EX200-2 40H 170*90 COUPLING 25 KLB-Q2571 25A 185*102 COUPLING 46 KLB-Q2046 50AC 14T  205*40 COUPLING
5 KLB-Q2005 40H 170*90 COUPLING ASSY 26 KLB-Q2026 25AS 185*102 COUPLING 47 KLB-Q2047 SH280   COUPLING
6 KLB-Q2006 45H 183*92 COUPLING 27 KLB-Q2571 28A 178*93 COUPLING 48 KLB-Q2048 E200B  12T   COUPLING
7 KLB-Q2007 45H 183*92 COUPLING ASSY 28 KLB-Q2571 28AS 178*93 COUPLING 49 KLB-Q2049 50AM  16T 205*45 COUPLING
8 KLB-Q2008 90H 203*107 COUPLING 29 KLB-Q2571 30A 215*118 COUPLING 50 KLB-Q2050 SH200 14T  205*40 COUPLING
9 KLB-Q2009 90H 203*107 COUPLING ASSY 30 KLB-Q2030 30AS 215*118 COUPLING 51 KLB-Q2051 E330C 350*145 COUPLING
10 KLB-Q2571 50H 195*110 COUPLING 31 KLB-Q2031 50A 205*108 COUPLING 52 KLB-Q2052 E330C   COUPLING
11 KLB-Q2011 50H 195*110 COUPLING ASSY 32 KLB-Q2032 50AS 205*108 COUPLING 53 KLB-Q2053 168mm*48m 26T 3H   COUPLING
12 KLB-Q2012 110H 215*110 COUPLING 33 KLB-Q2033 90A 272*140 COUPLING 54 KLB-Q2054 242mm*72mm 50T 8H   COUPLING
13 KLB-Q2013 110H 215*110 COUPLING ASSY 34 KLB-Q2034 90AS 272*140 COUPLING 55 KLB-Q2055 295mm*161mm 48T 12H   COUPLING
14 KLB-Q2014 140H 245*125 COUPLING 35 KLB-Q2035 140A 262*132 COUPLING 56 KLB-Q2056 352mm*161mm 48T 8H   COUPLING
15 KLB-Q2015 140H 245*125 COUPLING ASSY 36 KLB-Q2036 140AS 262*132 COUPLING 57 KLB-Q2057 352mm*161mm 46T 8H   COUPLING
16 KLB-Q2016 160H 255*134 COUPLING 37 KLB-Q2037 E300B 16T  278*54 COUPLING 58 KLB-Q2058 318mm*72mm 50T 8H   COUPLING
17 KLB-Q2017 160H 255*134 COUPLING ASSY 38 KLB-Q2038 E450 16T 360*52 COUPLING 59 KLB-Q2059 315mm 42T   COUPLING
18 KLB-Q2018 4A 104*53 COUPLING 39 KLB-Q2039 SH430 12T  205*35 COUPLING 60 KLB-Q2060 268mm*100mm 42T 6H   COUPLING
19 KLB-Q2019 4AS 104*53 COUPLING 40 KLB-Q2040 SH200 14T  205*40 COUPLING 61 KLB-Q2061 167mm*90mm 47T 3H   COUPLING
20 KLB-Q2571 8A 130*70 COUPLING 41 KLB-Q2041 50ASM 20T  205*40 COUPLING 62 KLB-Q2062 182mm 42T   COUPLING
21 KLB-Q2571 8AS 130*70 COUPLING 42 KLB-Q2042 SH160(SH60) 15T 173*22 COUPLING 63 KLB-Q2063 220mm 46T   COUPLING

 

1Q:What is your brand?
1A:Our own brand: Mita Group and its range of excavator parts.

2Q:Do you have your own factory? Can we have a visit?
2A:Absolutely, you are alwayswelcome to visit our factory.

3Q:How do you control the quality of the products?
3A:Our factory was obtained the ISO9001CERTIFICATE.Every process of the production is strictly controlled. And all products will be inspected by QC before shipment.

4Q:How long is the delivery time?
4A:2 to 7 days for ex-stock orders. 15 to 30 days for production.

5Q:Can we print our company logo onproduct and package?
5A:Yes, but the quantity of the order is required. And we need you to offer the Trademark Authorization to us.

6Q:Can you provide OEM BRAND package?
6A:Sorry, we can only offer our company ACT BRAND package or neutral packing,blank package ifyou need, and the Buyers’ Brand as authorized.7Q:How long is the warranty period?7A:3 months /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

flexible gear coupling

Maintenance Requirements for Flexible Gear Couplings

To extend the lifespan and ensure optimal performance of flexible gear couplings, regular maintenance is essential. Here are the key maintenance requirements:

  • Lubrication: Proper lubrication is crucial for flexible gear couplings. Regularly inspect the coupling’s lubrication system and ensure it is filled with the recommended lubricant. Adequate lubrication reduces friction, wear, and heat generation, leading to smoother operation and increased lifespan.
  • Inspection: Regularly inspect the flexible gear coupling for signs of wear, damage, or misalignment. Look for unusual vibrations, noise, or temperature increases during operation, as these may indicate issues that need attention.
  • Torque Monitoring: Periodically check the torque levels to ensure they are within the coupling’s specified limits. Overloading the coupling can lead to premature wear and failure.
  • Bolt Tightening: Check and tighten the coupling bolts as needed. Vibrations and continuous operation can cause bolts to loosen over time, affecting the coupling’s performance.
  • Alignment: If misalignment is detected during inspection, address it promptly. Proper shaft alignment is crucial for the coupling’s longevity and smooth operation.
  • Environmental Considerations: Be mindful of the operating environment. In harsh conditions, such as corrosive or high-temperature environments, additional protective measures may be necessary to safeguard the coupling’s integrity.

Following these maintenance practices will help prevent premature wear, reduce downtime, and extend the lifespan of flexible gear couplings, ensuring reliable and efficient power transmission in the long run.

flexible gear coupling

Potential Causes of Failure in Flexible Gear Couplings and Prevention

Flexible gear couplings, like any mechanical component, may experience failures if not properly maintained or operated. Some potential causes of failure and ways to prevent them include:

  • Misalignment: Misalignment between the shafts can cause excessive stress on the coupling components, leading to failure. Regularly check and align the shafts to ensure they are properly aligned within specified tolerances.
  • Overloading: Exceeding the rated torque capacity of the coupling can result in premature failure. Always operate within the recommended torque limits and avoid sudden shock loads.
  • Poor Lubrication: Inadequate or improper lubrication can lead to increased friction, wear, and overheating. Follow the manufacturer’s guidelines for lubrication frequency and use the correct type of lubricant.
  • Corrosion: Exposure to corrosive environments can degrade the coupling’s material over time. Select couplings made from corrosion-resistant materials or use protective coatings when necessary.
  • Fatigue: Cyclic loading and continuous operation can cause fatigue failure in flexible gear couplings. Ensure the coupling is rated for the application’s required number of cycles and replace it if it shows signs of fatigue or wear.
  • Temperature: Operating the coupling at temperatures beyond its limits can lead to material degradation and reduced performance. Check the coupling’s temperature rating and operate within the specified range.

Regular inspection, maintenance, and adherence to the manufacturer’s guidelines are essential to prevent failure and ensure the reliable performance of flexible gear couplings. Implementing preventive measures can extend the couplings’ lifespan, minimize downtime, and enhance the overall efficiency of the machinery they are part of.

flexible gear coupling

Industry Standards and Certifications for Flexible Gear Couplings

Flexible gear couplings are essential components in mechanical power transmission systems, and there are industry standards and certifications that govern their design, manufacturing, and performance. Some of the most commonly recognized standards and certifications for flexible gear couplings include:

  • ISO 9001: This certification ensures that the manufacturer follows a quality management system that meets international standards, ensuring consistent and reliable production of flexible gear couplings.
  • AGMA Standards: The American Gear Manufacturers Association (AGMA) has published various standards related to gear couplings, including AGMA 9002 for flexible couplings, which provides guidelines for design, selection, installation, and lubrication.
  • API Standards: The American Petroleum Institute (API) has established standards for couplings used in the oil and gas industry. API 671 specifically covers the requirements for special-purpose couplings, including gear couplings, used in petroleum, chemical, and gas industry services.
  • CE Marking: The CE marking indicates that the flexible gear coupling complies with the European Union’s health, safety, and environmental protection standards, making it eligible for sale within the EU market.
  • ATEX Certification: If the flexible gear coupling is intended for use in potentially explosive atmospheres, it may require ATEX certification, which ensures compliance with European Union directives for explosive atmosphere protection.

When selecting a flexible gear coupling, it is essential to verify if it conforms to the necessary industry standards and certifications to ensure the coupling’s performance, safety, and reliability in your specific application.

China Custom Spline Gear 15t 125X51X45X60 Coupling Gear Flexible Coupling for Excavator  China Custom Spline Gear 15t 125X51X45X60 Coupling Gear Flexible Coupling for Excavator
editor by CX 2024-03-30

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *