China best China Drum Gear Flexible Coupling with Brake Disc

Product Description

China Drum Gear Flexible Coupling With Brake Disc

 

Product Description

 

♦Description
Drum gear type coupling belongs to rigid flexible coupling, gear type coupling is composed of inner gear ring and flange half coupling with outer gear with same number of teeth.Can improve the contact conditions of teeth, improve the ability to transfer torque, extend the service life.Radial, axial and angular axis deviation compensation ability, has a compact structure, small turning radius, large carrying capacity, high transmission efficiency, low noise and long maintenance cycle, especially suitable for the condition of low speed and heavy loading, such as metallurgy, mining, lifting transportation and other industries, can also be applied to petroleum, chemical industry, general machinery and other kinds of shaft transmission of machine.
♦Main Dimension and Parameter(Q/LZP02.02-2005)

Type Nominal Torque
Tn/(N·m)
Allowable
Speed
(n)/(r/min)
Bore Diameter
d1d2dz
Bore Length
(L)
D0 D D1 D2 D3 L0 T C1 C2 e Grease dosage(v)
mL 
Mess
(m)
kg
Rotary inertia(l)
L/(kg·m2)
Driven Drive Y J1Z1
PGCLK1 630 4000 20 24 52 38 315 125 95 60 80 90 30 25 39 30 55 7.0 0.01
PGCLK2 1120 4000 25 28 62 44 315 144 120 75 95 105 30 25.5 44 30 100 11.2 0.03
PGCLK3 2240 3550 30 38 82 60 355 174 140 95 115 130 30 18 40 30 140 21.3 0.05
PGCLK4 3550 2500 32 38 82 60 40 196 165 115 130 130 30 29 47 30 170 29.5 0.11
PGCLK5 5000 2500 40 56 112 84 400 224 183 130 150 150 30 18 43 30 270 47.1 0.20
PGCLK6 7100 2000 48 56 112 84 450 241 200 145 170 155 30 21 50 30 380 60.1 0.31
PGCLK7 10000 1700 60 75 142 107 450 265 230 160 190 180 30 19 50 30 570 88.9 0.56
PGCLK8 14000 1700 65 75 142 107 500 285 245 175 210 180 30 20 50 30 660 105.4 0.79
PGCLK9 18000 1600 70 75 142 107 560 314 270 200 225 200 30 25 60 30 700 130.1 1.22
PGCLK10 31500 1600 80 95 172 132 800 346 300 220 250 230 30 20 58 30 900 191.2 2.17
PGCLK11 40000 1400 100 120 212 167 800 385 330 260 285 260 30 21 64 40 1200 268.2 3.88
PGCLK12 56000 1400 120 212 167 900 442 380 290 325 280 30 21 72 40 2000 369.9 6.90
PGCLK13 80000 1400 140 150 252 202 900 482 420 320 360 320 30 22 70 40 3000 522.6 11.91
PGCLK14 112000 1200 160 180 302 242 900 520 465 360 410 360 30 23 85 40 4500 756.9 20.70

Note:
1. The mass and moment of inertia of the coupling are approximate values calculated according to the minimum shaft hole diameter and maximum shaft hole length in each type;
2. The maximum braking torque Tm of the coupling shall not exceed 2 times of the nominal torque Tn, that is, Tm≤2Tn;
3. e is the size required for sealing;
4. The combination of coupling shaft hole is Z1/J1, Y/Y, J1/J1, Y/J1.

 

♦Other Products List

Transmission Machinery 
Parts Name
Model
Universal Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

 

♦Our Company

HangZhou CHINAMFG Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.

Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.

Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective. 

♦Our Services
1. Design Services
Our design team has experience in Cardan shafts relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.

2. Product Services
Raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→ Packing→ Shipping

3. Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.

4. Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.

5. Quality Control
Every step should be a special test by Professional Staff according to the standard of ISO9001 and TS16949.
 

FAQ

 

♦FAQ
Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of couplings.

Q 2: Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks in PDF or AI format.

Q 3: How long is your delivery time?
Generally, it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: Do you provide samples? Is it free or extra?
Yes, we could offer the sample but not for free. Actually, we have a very good price principle, when you make the bulk order the cost of the sample will be deducted.

Q 5: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q 6: What is the MOQ?
A: Usually our MOQ is 1 pcs.

Q 7: Do you have inspection procedures for coupling?
A: 100% self-inspection before packing.

Q 8: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.

Q 9: What’s your payment?
A: T/T.  
 

♦Contact Us

Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

flexible gear coupling

Maintenance Requirements for Flexible Gear Couplings

To extend the lifespan and ensure optimal performance of flexible gear couplings, regular maintenance is essential. Here are the key maintenance requirements:

  • Lubrication: Proper lubrication is crucial for flexible gear couplings. Regularly inspect the coupling’s lubrication system and ensure it is filled with the recommended lubricant. Adequate lubrication reduces friction, wear, and heat generation, leading to smoother operation and increased lifespan.
  • Inspection: Regularly inspect the flexible gear coupling for signs of wear, damage, or misalignment. Look for unusual vibrations, noise, or temperature increases during operation, as these may indicate issues that need attention.
  • Torque Monitoring: Periodically check the torque levels to ensure they are within the coupling’s specified limits. Overloading the coupling can lead to premature wear and failure.
  • Bolt Tightening: Check and tighten the coupling bolts as needed. Vibrations and continuous operation can cause bolts to loosen over time, affecting the coupling’s performance.
  • Alignment: If misalignment is detected during inspection, address it promptly. Proper shaft alignment is crucial for the coupling’s longevity and smooth operation.
  • Environmental Considerations: Be mindful of the operating environment. In harsh conditions, such as corrosive or high-temperature environments, additional protective measures may be necessary to safeguard the coupling’s integrity.

Following these maintenance practices will help prevent premature wear, reduce downtime, and extend the lifespan of flexible gear couplings, ensuring reliable and efficient power transmission in the long run.

flexible gear coupling

Enhanced Performance of Flexible Gear Couplings through Gear Teeth Flexibility

The flexibility of gear teeth in flexible gear couplings plays a crucial role in enhancing their overall performance. This flexibility allows the coupling to compensate for misalignments and absorb shocks and vibrations, providing several key benefits:

  • Misalignment Compensation: As the machinery operates, shafts may experience angular, parallel, or axial misalignments due to various factors like thermal expansion, foundation settlement, or manufacturing tolerances. The flexible gear teeth in the coupling can accommodate these misalignments by slight bending or elastic deformation, ensuring the smooth transmission of torque between the shafts despite their misaligned positions.
  • Vibration Damping: During operation, rotating equipment can generate vibrations caused by uneven loads, resonance, or other factors. The flexible gear teeth act as shock absorbers, dampening these vibrations and preventing them from propagating throughout the system. This helps reduce noise, wear, and stress on the machinery components, contributing to smoother and quieter operation.
  • Load Distribution: The flexibility of the gear teeth allows the coupling to distribute the transmitted load evenly across the entire tooth surface. This even load distribution reduces wear and fatigue on the gear teeth, increasing the coupling’s overall lifespan and reliability.
  • Overload Protection: In case of sudden shock loads or overloads, the flexible gear teeth can absorb part of the impact, protecting the connected equipment from damage. This feature is especially important in applications with variable loads or potential shock events.
  • Torsional Flexibility: The gear teeth’s flexibility enables the coupling to handle torsional movements, ensuring that torque is smoothly transferred between the shafts even if they are not perfectly aligned. This feature helps maintain constant velocity transmission, critical in precision systems.

Overall, the flexibility of gear teeth in flexible gear couplings allows these couplings to adapt to changing conditions, provide protection against unexpected forces, and improve the performance and reliability of mechanical power transmission systems.

flexible gear coupling

Advantages of Flexible Gear Couplings

Flexible gear couplings offer several advantages over other types of couplings:

  1. Misalignment Compensation: Flexible gear couplings can accommodate angular, parallel, and axial misalignments between the connected shafts. This ability to compensate for misalignment reduces stress on the machinery, shafts, and bearings, leading to improved overall system reliability and reduced maintenance requirements.
  2. Vibration Damping: The elastomeric flexible element in the coupling acts as a damping mechanism, absorbing vibrations and shocks during operation. This feature helps in reducing noise levels and protecting the connected equipment from damage caused by excessive vibrations.
  3. High Torque Transmission: Flexible gear couplings are designed to handle high torque loads, making them suitable for heavy-duty applications in various industries.
  4. Compact Design: Compared to some other types of couplings, flexible gear couplings have a relatively compact design, making them suitable for applications with space constraints.
  5. Easy Installation and Maintenance: The simple design and flexible nature of these couplings make them easy to install and maintain, minimizing downtime and associated costs.
  6. Reliability: Flexible gear couplings are known for their reliability and long service life, ensuring uninterrupted power transmission in critical industrial processes.
  7. Torsional Flexibility: The elastomeric material used in the coupling provides high torsional flexibility, enabling smooth torque transmission even in applications with varying loads and speeds.

Overall, the advantages of flexible gear couplings make them a popular choice for power transmission systems in various industries, including mining, steel, paper, and chemical processing, where the demands for performance, reliability, and durability are essential.

China best China Drum Gear Flexible Coupling with Brake Disc  China best China Drum Gear Flexible Coupling with Brake Disc
editor by CX 2024-04-11

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *